WST3 ESD Footwear / Wrist Strap Test Station is a full testing station for personal grounding equipment which includes a WST1 meter, wall plate, footplate and test leads. ESD wrist straps and foot grounders need to be checked on a regular basis to ensure they are faultless and ground the operator properly. This is where an ESD Footwear / Wrist Strap Test Station can help. This testing station will check the continuity of fitted anti-static wrist-straps, cords, fitted shoes, heel straps or toe grounders when worn by an operator.
WST3 is the full station, supplied with a WST1 meter, wall mounting board, 6 inch cord (0 meg ohm), 6ft cord (0 meg ohm), footplate and 9V battery. The WST1 meter has a banana socket and 10mm stud. The unit has a single test range of 0.75 meg-ohm to 35 meg-ohm, meeting the IEC 61340-5-1 specification (other resistance ranges available on request).
The instrument has a green light for PASS (i.e. resistance between 0.75 meg-ohm and 35 meg-ohm) and 2 red lights which indicate either HIGH resistance fail or LOW resistance fail. A buzzer sounds in any fail situation. The test station is easy to use and can be mounted to any wall with ease. The footplate can be connected to the test station via the 6ft cord. Full instruction guide and calibration certificate supplied with each unit. Calibration is recommended annually. A full calibration service can also be requested. Customised logos and resistance range available on request. The product is CE approved.
This part is for the complete kit including Tester, Wall Mounted Board and Foot Board. If you require a wall mounted station and tester only view WST2. If you require the Tester only view WST1.
Key Product Features & Benefits:
– Supplied with WST1 meter, wall mounting board, 6 inch cord (0 meg-ohm), 6ft cord (0 meg-ohm), footplate and 9V battery
– WST1 meter has a banana socket and 10mm stud
– Dimensions of tester: 130mm x 70mm x 25mm
– Single test range of 0.75 meg-ohm to 35 meg-ohm
– Yellow backing board with black text
– Provides reliable and accurate readings
– Portable and very easy to use
– Method of operation: Push button
– x4 LED lights (High Fail, Pass, Low Fail, Low Battery)
– 9V battery is required
– Full calibration service available with Bondline
– Each unit is supplied with 1 year calibration certificate
– Calibration required annually
– Customisable: Private labelling, colours, logos and specific resistance ranges can be made on request
– Manufactured to the very highest quality allowing qualification to council directives 89/336/EEC
– Compliant to IEC 61340-5-1, CE, UKCA, RoHS and REACH standards
Reviews
There are no reviews yet.