MG Chemicals 8331S electrically conductive paste is a 2-part heat-cured epoxy with a long working time. It is smooth, non-sagging, thixotropic, and bonds well to a wide variety of substrates.
This electrically conductive epoxy paste can be used as a solder replacement for bonding heat-sensitive electronic components, or for making conductive connections where soldering is not an option, such as when bonding to glass, soft metals, or plastics. It provides excellent EMI/RFI shielding and is very effective in filling seams between metal plates.
8331S has been formulated to be economical. For a higher fill version that maximizes conductivity, use 8330S. For a shorter working time or room temperature cure, use 8331D.
For a 1-part alternative use 9410 or 9400.
This product is supplied in a 6ml (18g) Dual Syringe, a 50ml Kit (2 Jar Kit) and a 200ml Kit (2 Can Kit).
If you are looking for large quantities, please contact our Sales Office to discuss.
Key Product Features & Benefits:
– Supplied in a 6ml (18g) Dual Syringe, a 50ml Kit (2 Jar Kit) and a 200ml Kit (2 Can Kit).
– NASA low outgassing approved
– High electrical conductivity
– Convenient 1 to 1 mix ratio
– Working time: 4 hours
– Cure time: 2 hours at 65 °C (149 °F) or 30 minutes at 100 °C (212 °F)
– Creates strong permanent electrical connections
– Excellent adhesion to many substrates
– Room temperature storage
– Long shelf life
– Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Reviews
There are no reviews yet.